|
|
|
|
|
THIS AQUA-CORRECT®
PERFORMANCE GUARANTEE"
IS VALID FOR ALL SYSTEMS SUPPLIED AND CORRECTLY INSTALLED IN
ACCORDANCE WITH OUR INSTRUCTIONS FOR ORDINARY COLD AND HOT WATER
SUPPLIES IN BUILDINGS. THE GUARANTEE PERIOD STARTS FROM DATE
OF INSTALLATION.
AQUA-CORRECT®
system
function
1. REDUCTION OF THE WATER
SURFACE TENSION OF 10% IN WATER AT 18 HARDNESS DEGREES AND AT
20 OC. (WATER INSTITUTE PTS-WAF, MUNICH, GERMANY).
2. EFFECTIVE DESOLUTION OF CALCIUM AS DOCUMENTATED IN CRYSTAL
TESTS (WIZZARD-METHOD AT THE DANISH TECHNOLOGICAL UNIVERSITY).
AND LONG TIME FUNCTION AFTER 14 DAYS: 90% FULL PERFORMANCE EFFICIENCY.
AQUA-CORRECT®
system
performance
3. IMMEDIATE PREVENTION
OF NEW LIME SCALE DEPOSITS (MAX. CA. 0.5 mm CALCIUM CARBONATE).
4. DISSOLVING OF EXISTING CALCIUM DEPOSITS.
5. THE REDUCED WATER SURFACE TENSION NORMALLY SAVES DOSAGE OF
CHEMICAL AND SOAP ADDITIVES.
6. PREVENTION OF CORROSION AND OCRE. (REQUIRE THAT THE FORMER
IN LIME SCALE BEDDED AND NOW FREE AGRRESIVE PARTICELS ARE SUBSEQUENTLY
REMOVED).
AQUA-CORRECT®
system
function advantages.
7. THE TREATMENT DOES NOT
CHANGE THE WATER QUALITY OR CONTENT OF LIFE DEPENDING MINERAL
AND HAS NO INFLUENCE OR INCREASING BACTEROLOGICAL FACTOR.
8. NO DEMAND FOR MINIMUM WATER FLOW OR FLOW DIRECTION.
FULL FUNCTION FROM THE FIRST DROP. TOTAL FREE INSIDE FLOW WITHOUT
PRESURE LOSS.
9. TURBULANCE AND CO2 FREE. THUS NO CORROSION DANGER BY ADDITIONAL
FREE CO2.
10. THE UNIT FREE FLOW TUBE CAN BE CLEANED FOR MAGNETIC PARTICLES
(SHORT CUTS) WITHOUT ANY DAMAGE AND WILL REGAIN ITS FULL FUNCTION
CAPACITY.
11. OUR 5 YEAR TEST: ONLY 0.2% POWER LOSS. THE EXPECTED LIFETIME
IS ESTIMATED MIN. 50 YEARS.
5 Year
material guarantee.
THE GUARANTEE PERIOD STARTS FROM DATE OF INSTALLATION AND IS
VALID UPON CORRECT INSTALLATION IN ACCORDANCE WITH THE AQUA CORRECT
system INSTRUCTIONS.
THE GUARENTEE COVERS LISTED ITEMS 1-TO 11. IN CASE OF MATERIAL
OR PERFORMANCE FAULT, WE SHALL BE DULY NOTIFIED BY WRIITTEN,
SIGNED LETTER. AQUA CORRECT WILL, IN CASE OF MATERIAL FAULT,
DELIVER A NEW AND EQUAL TYPE. RECLAMATIONS BEOYND THIS GUARANTEE
AND REGRESS DUE TO THE FOLLOWING REASONS ARE NOT ACCEPTED:
a) Incorrect installation and capacity AQUA CORRECT system types.
b) Unprofessional handling, malicious damage or intervention
attempts into the AQUA CORRECT System.
c) Tube damages, new as old, and ordinary wear and tear.
d) Constipation due to dissolved particles and sedimentation,
galvanic potentials, and all chemical reactions.
e) Scale deposits on high temperature surfaces as well as the
corrosion protecting normal thin layer of calcium bicarbonate.
f) All system conditions, that require our projecting or recommended
changes to achieve the optimal AQUA CORRECT system performance.
h) All AQUA CORRECT system installations in pressurised steam
plants etc. requiring special authority approval.
i) In case of force majeure (fire, war, flash of lightening etc.)
We shall not be made liable for limited or missing result, if
our instructions are neglected or our investigation prove, that
influence by other circumstances interfere or prevent AQUA CORRECT
system to perform as it would if installed in a normal application.
We shall
not be made liable for any injuries on persons or objects caused
by malicious damage or intervention attempts into the System.
The purchaser is responsible to prevent, secure and insure against
any such actions.
Industrial installations and applications are covered by a separate
AQUA-CORRECT®
guarantee. |
|
|
|
|
